Replacement for Whitfield Stove Blower 1/35 HP, 3000 RPM, 115 Volt

Specifications: Rotation = CWSingle PhaseSleeve BearingsIncludes GasketClass BSquare discharge, square flangeThese are designed to be replacements for the listed blower model number. The blowers are aftermarket models-not original equipment. Note Regarding Speed Controls: With more and more people using wood burning stoves during heating of some issues surrounding the speed controls that vary the air output from centrifugal blowers. On a single speed blower, a speed control wired in series with the hot line will allow the user to control the speed of the blower. Many speed controls will not lower voltage below 60 and will not allow the wheel to slow to 0 RPM. Also, the combination of a blower and a speed control can often result in what is called “harmonic noise” – strange vibrations and/or noises in the customer’s unit. Slightly increasing or decreasing the blower speed can sometimes eliminate this problem – but it is often not 100% removable. Care should also be used in applying solid state speed control devices, as they are often installed in the common line, or in a non-polarized plug setup. So even though the motor may not be turning because the speed control is turned too low for the motor to operate, electricity is still connected to the speed control and a potential shock hazard exists. Finally, do not use light dimmer switches as speed controls for the centrifugal blower. Controls should be approved for use with the motors found in these units. Keep in mind that the manufactures of these blowers recommend that they not be speed controlled. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
【DESCRIPTION】Wood burning stoves heat your home. This controls the air output from centrifugal blowers. On a single speed blower, a speed control wired in series with the hot line will allow the user to control the speed of the blower. Many speed controls will not lower voltage below 60 and will not allow the wheel to slow to 0 RPM. Also, the combination of a blower and a speed control can often result in what is called “harmonic noise”, strange vibrations and/or noises in the customer’s unit.
Slightly increasing or decreasing the blower speed can sometimes eliminate this problem, but it is often not 100% removable.
【REFERENCE】7021-7786, 702111470, 7021-11470, 70217786
【REPLACES】Quest Whitfield Pellet Stove Blower 12126109, 12146109
【 PRODUCT SPECIFICATIONS】1/35 hp, 1.5 amps, 115 Volt, 3000 RPM, CW (clockwise), single phase, sleeve bearings, Class B, square discharge, square flange
【GASKET INCLUDED 】6" leads with flat connector plug (2 wires)
【RISK FREE SHOPPING 】Superior quality you can trust! This part by SupplyEdge is UL/CSA approved to assure safe operation and long life. This part comes with a 1 year, no questions asked, no hassle warr anty.

Returns Accepted for this item if it's within 30 Days